Enhance your vehicle diagnostics by integrating the Advanced LT plugin into Torque Pro. This powerful addition enables you to monitor specific KIA parameters in real-time, offering deeper insights into your car’s performance, including advanced engine and automatic transmission sensor data.

Advanced LT is a specialized plugin for Torque Pro that expands the list of available PIDs and sensors specifically for KIA vehicles. It allows users to test the plugin with a limited set of sensors before purchasing the full version. Please note that this version does not include calculated sensors such as Injector Duty Cycle (%) or HIVEC mode.

Supported KIA Models & Engines

While the plugin may support additional KIA models and engines beyond those listed below, it has been officially tested on the following:

• Carnival/Sedona 3.8 V6
• Carnival/Sedona 2.7 V6
• Carnival/Sedona 2.2 CRDI
• Cee'd 1.4/1.6 MPI
• Cee'd 2.0 MPI
• Cee'd 1.4/1.6 CRDI
• Cee'd 2.0 CRDI
• Cee'd 1.6 GDI
• Cerato/Forte 1.6 MPI
• Cerato/Forte 1.8 MPI/GDI
• Cerato/Forte 2.0 MPI/GDI
• Optima/K5 2.0 Turbo
• Optima/K5 2.0/2.4 GDI
• Mohave/Borrego 3.8 V6
• Mohave/Borrego 3.0 CRDI
• Rio 1.4/1.6 MPI
• Rio 1.2 MPI
• Soul 1.6 MPI
• Soul 2.0 MPI
• Sorento 2.4 GDI
• Sorento 3.5 V6
• Sorento 2.0/2.2 CRDI
• Spectra/Cerato 1.6 MPI
• Spectra/Cerato 2.0 MPI
• Sportage 2.0 MPI
• Sportage 2.7 V6
• Sportage 2.0 CRDI
• Sportage 1.6 MPI
• Sportage 2.0/2.4 MPI/GDI
• Venga 1.4/1.6 MPI
• Venga 1.4/1.6 CRDI

The plugin also features an ECU Scanner, which helps identify unsupported sensors on KIA engines. To use this feature, record at least 1000 samples and submit the logs to the developer for analysis.

Installation Instructions

1. After downloading the plugin from Google Play, ensure it appears in your Android device's list of installed applications.
2. Open Torque Pro and tap the "Advanced LT" icon.
3. Select the correct engine type, then return to the main screen of Torque Pro.
4. Navigate to Torque Pro Settings.
5. Verify that the plugin is listed under "Plugins" > "Installed Plugins".
6. Scroll down and select "Manage extra PIDs/Sensors".
7. If no entries appear, proceed to add a predefined set from the menu.
8. Choose the appropriate engine type from the list (ensure it matches your vehicle).
9. After selection, new entries will appear in the Extra PIDs/Sensors list.

Adding Displays in Torque Pro

1. Once the additional sensors are added, go to the Realtime Information or Dashboard section.
2. Press the menu key and select "Add Display".
3. Choose a display type—Dial, Bar, Graph, Digital Display, etc.
4. Select the desired sensor from the list. Sensors provided by [ttpp] begin with "[KADV]" and appear right after time-related sensors.

More features and parameters will be introduced in future updates. If you have any suggestions or feedback, feel free to reach out—we're always looking to improve!